A lot of times I get booked to do a tap dancing performance on a stage that is not ideal for tap dancing. Natural wood sounds the best but sometimes that’s not available. For that reason, I built a mobile tap board to take with me on gigs when needed.
The board I’ve been using for the past years has been through a lot. I also decided I wanted to upgrade it so I set out to built a new one. DIY time.
I bought a roughly one square meter MDF board that I got from the great people at North Road Timber in Brighton. MDF however doesn’t sound too great, it was merely supposed to be the base for my new board. I found some thin oak pieces that I wanted to glue on top to give me the sound I wanted.
I cut the long pieces of oak in a rough shape, glued them on the MDF with wood glue and let that dry overnight. I put anything heavy I could find in my house to weigh the construction down and make sure the boards connected properly and the glue would mold it all together.
The next day, I added some nails to tighten the connections. The edges of the oak boards had to now be trimmed to fit the exact size of the MDF board. Finally I filled the holes in between the individual boards with wood filler. I let that dry for another day before I polished the board’s surfaces and edges. I had planned to coat the board with varnish but since I was going to use it the next day for a gig, I had to postpone the cosmetic part of the process for now.
As a last step (not pictured) I added a strap to the sides of the board to be able to carry it around. Done! Let’s dance!
Related Posts
6th August 2019
BTS at the “Wizard of Oz” Musical
Have a look at how the set for "The Wizard of Oz" came to life.
29th May 2019
BTS “Swinging at the Cotton Club”
A few images of me getting ready for a show in Tewksbury's "Roses Theather" in May 2019.















